"Today because of the heat I took my wife shopping around Bridgewater and Verdun. And lo, not just one, or two, but THREE bunches of cyclists slowed my rate of travelling. Being a cyclist myself, I happily kept a safe distance behind as I knew that…"
"I don't think that Greenhill Rd is a safe ascent at any time of day, it's a bit of a race track with nowhere to get off. If you're not riding up the SE freeway bike track from the Tollgate to Crafers I would suggest Norton Summit Rd…"
"The route isn't bad but you can do a couple of detours. When you exit Belair National Park, go across Upper Sturt Rd to Pine Lodge Drive and left on Bermuda Way, a shared trail will take you along Minno Ck to near the eastern side of the…"
"Never seen one on the eastern side of the city. I doubt that you'll ever see one within the Linear Park zone due to vandalism concerns. The ones that exist within lit public spaces lose their tools in any case. There's an incomplete map of…"
"Welding steel frames is pretty easy, I've done it myself (I have a suitable welder). The steel needs to be 100% free of paint for about 10mm around the weld, then any competent sheet metal welder (or crash repairer) should be able to do it.…"
"Much easier to cross the railway line at the Old Bowden Station footbridge and use East St and Chief St on the southern side of the line. You can sticky beak at the demolition on the gas works site better from that side too."